Penetrating Oil Showdown Episode 2. Will Seafoam Deep Creep prevail?

  • Published on: 11 June 2018
  • This test demonstrates that not all penetrating oils are equal. In fact, the see-through plastic/rusty bolt test shows which ones actually penetrate and which ones don't. Which penetrating fluid is best? In this showdown, Brake Fluid, Seafoam Deep Creep, Fluid Film, BG In-Force, WD-40 Rust Specialist, CRC Knock'er Loose. Consider selecting the bell in the upper right hand corner to get notified of future videos. Deep Creep won the competition with CRC Knock-er Loose coming in a close 2nd. Thank you very much for supporting the channel through Patreon and watching the commercials. https://www.patreon.com/projectfarm
  • Runtime : 10:58
  • Seafoam additive oil crankcase sea foam lucas marvel mystery oil marvels marvel mystery oil seefoam Sea foam Seefoam See Foam does seafoam work wd-40 kroil aerokroil liquid wrench pb blaster royal purple penetration fluid penetration spray rust rusty lug nut torch heat rusty rusty bolt rusty thread rusty threads loctite crc crc knock'er loose bg inforce bg in force seafoam deep creep rust specialist fluid film brake fluid wd-40 rust specialist

COMMENTS: 40

  • this is fun
    this is fun   1 hours ago

    Yes some people do spray penetrant on a bolt like even the day before or longer especially if we know it’s gonna be a bitch to get loose. Think exhaust bolts.

  • dliv1687
    dliv1687   4 hours ago

    I didn't know that you could use brake fluid in place of wd40

  • mikekoz68
    mikekoz68   1 days ago

    Fluid film is an awesome product but it’s not a penetrating oil. If it’s all ya got then sure but it’s a much better rust preventer and a waterproofing coating for things

  • ktm42080
    ktm42080   2 days ago

    Really like the drilled and tapped plexiglass! Shows what would be the better choices.

  • Matthew McGrew
    Matthew McGrew   2 days ago

    Thank you for going back and improving your methods!

  • sladelefty
    sladelefty   3 days ago

    Kroil the oil that creeps with a million silly cones

  • not tryna argue but
    not tryna argue but   3 days ago

    Whoever suggested measuring amount used was being pedantic. Yeah it would be the more "scientific" approach but when we're working on loose parts we just do like in the first video and apply till coated. If the first test were redone using a dropper I'm sure there would be no difference. And as seen here one of the products was so thick it would need more just to spread around. Anyway, good work and yeah let's see that seafoam vs liquid wrench showdown!

  • john wilkerson
    john wilkerson   5 days ago

    I love this but it does make me wonder how different the tests would have been had the products been sprayed on a nut/bolt as the manufacturer intended. Some of those had a foaming action that could have pushed it further down the threads

  • pwoodson21
    pwoodson21   6 days ago

    every mechanic knows the best is a custom mix of acetone and transmission fluid 50/50 mix does the job on just about anything

  • WilleyGHD3
    WilleyGHD3   6 days ago

    Here's one I never knew about - comes from an old mechanic who used to build hotrods in the 50's: Real Wintergreen Oil! I saved my engine block with it! Warm the item up, put the oil in the seam, let it sit for a hour or so and then see if it's still stuck.

  • Silver Strings
    Silver Strings   1 weeks ago

    It seemed like several of these rely on the foaming action. (Fluid film, for instance)

  • Eval 666
    Eval 666   1 weeks ago

    I'd like to see that with the standard wd-40 and with the prolab PL-100

  • Jessi Louis
    Jessi Louis   1 weeks ago

    when the can of stuff goes above about 4 bucks , thats when I say; "time to use a grinder and/or sawzall. I don't see spending a ton of money for bolt looseners. Also you can invest in a serious impact wrench that will last a long time. That being said , I wonder how those new "freezy" bolt looseners work compared to liquid wrench and sea foam?

  • D'Artagnan Taft
    D'Artagnan Taft   1 weeks ago

    I would have liked to see how P.B. Blaster compared to the rest.

  • Paul Wilkins
    Paul Wilkins   1 weeks ago

    Might be an idea to rig up some sort of jig to keep the wrench perpendicular to the nut face as this firstly ensures the torque being applied is used exclusively to undo the nut instead of overcoming the inevitable side force the wrench induces when used. Secondly, having a jig standardises each test. I used to calibrate torque wrenches and it was incredible the difference in readings when altering the human applied force.

  • Paul Wilkins
    Paul Wilkins   1 weeks ago

    Hi, I would definitely recommend wearing latex gloves or similar.

  • Jan Burja
    Jan Burja   1 weeks ago

    Do you use a bot for anwsering comments or do you do it yourself?

  • REKLUSE
    REKLUSE   1 weeks ago

    We use a product for aviation called Aerokroil. Unbelievable product as well as ACF50.

  • joe833a
    joe833a   1 weeks ago

    these adds are disgusting!

  • Humili8u
    Humili8u   1 weeks ago

    Kroil is by far the best

  • Sam Otero
    Sam Otero   1 weeks ago

    There's a penetrating product called Houdini penetrating spray I use a lot have you tested or used it before? Could you test against others?

  • G K
    G K   1 weeks ago

    I use Wd40 only for Cocking

  • kenny wheeler
    kenny wheeler   1 weeks ago

    Hello, I have been a long time user of PB Blaster for rust bolts and nuts, and I 100% stand by my product. It has always helped. I'd like to see a show-down between PB Blaster and Sea Foam. Thanks!

  • JrMcBabyface
    JrMcBabyface   1 weeks ago

    Who is lazy enough to not wait for something to do its job right? If you want something quicker, then buy something quicker. But don't crap on something cause it didn't work in 15 seconds. If you want 15 second results buy PB BLASTER. Notice he didn't do the best product on the market even though it's cheaper than half the crap he tested

  • George Armstrong
    George Armstrong   1 weeks ago

    I very much dislike WD-40, but I find it hard to believe it didn't beat control.

  • George Armstrong
    George Armstrong   1 weeks ago

    Should try this with honda pro white graphite chain lube. I know it sounds like it wouldn't be a good choice, but I bet it would out perform all. I'm surprised the CRC didn't do better honestly. They make good stuff too.